Flame Retardant Chemistry Lab Furniture FRP Test Table for Laboratory
Quick Details
Material: FRP materials
Size: L*750/1500*850 mm
Type: Laboratory workbench furniture
General Use: Commercial Furniture
Place of Origin: Guangdong, China
Color: grey white
Frame: Floor Mounted Structure
Worktop: FRP board , Epoxy phenolic resin board, epoxy resin board
MOQ: 2 pcs
Loading Port: Guangzhou,shenzhen
Delivery Terms: EXW,FOB,CIF,CFR
Structure: FRP
Guarantee: 5 Years
Profesional Design: Our lab furniture can design and customize lab furniture with you. you only supply to us your laout , and description of your application. and we will give you designing drawing to you
Product requirements: the internal and external surface of the product shall be bright, smooth and smooth, without falling off, bubbling, indentation and surface scratch, pitting, crack and edge, advanced technology, beautiful and durable.
※ tap requirements: tap must be formed at one time, without seam, smooth inside and outside surface, prevent side leakage of solution and so on.
The bearing capacity of the product is up to 400~500KG, and the thickness of the material after molding is ≥4mm.
There is no additional layer inside the molding products, and the inside and outside materials are the same.
The product density shall reach 1.809g/cm2 and meet the national inspection standard (GB/T 1033.2-2008).
Thermal deformation temperature (1.8mpa) > 180℃, meet the national (GB/T 1634.2-2004) inspection standards.
The horizontal combustion performance reaches HB level and meets the national (GB/T 2408-2008) inspection standard.
The test report of the national testing department with CMA or CNAS qualification meeting the above conditions shall be provided.
※ CNC equipment is molded with depth deviation ≤2mm, height deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;
Does FRP flame retardant anticorrosion test bench to meet national environmental protection equipment testing institutions chemical performance test: sulfuric acid (98%), hydrochloric acid, nitric acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride, acetic acid (99%), hydrogen peroxide (3%), sodium sulphide saturated liquid, formaldehyde (37%), phenol, phosphoric acid (85%), hydrofluoric acid (48%), and other 12 chemical testing, test results is no obvious change.
Flame Retardant Chemistry Lab Furniture FRP Test Table for Laboratory
FRP lab bench advantage:
1. The test bench is made of polymer composite sheet material through high pressure thermosetting of machine and equipment.It has the following characteristics:
Waterproof and anti-condensation, high temperature resistance, anti-scratch and wear resistance, acid and alkali resistance, corrosion resistance, anti-aging, long service life (up to more than 10 years), flame retardant, environmental protection, simple disassembly (can be repeatedly installed and disassembled, will not produce damage and deformation), flexible color matching and other adva
2. Product requirements: the internal and external surface of the product shall be bright, smooth and smooth, without falling off, bubbling, indentation and surface scratch, pitting, crack and edge, advanced technology, beautiful and durable.
3. tap requirements: tap must be formed at one time, without seam, smooth inside and outside surface, prevent side leakage of solution and so on.
4 .The bearing capacity of the product is up to 400~500KG, and the thickness of the material after molding is ≥4mm.
There is no additional layer inside the molding products, and the inside and outside materials are the same.
The product density shall reach 1.809g/cm2 and meet the national inspection standard (GB/T 1033.2-2008).
Thermal deformation temperature (1.8mpa) > 180℃, meet the national (GB/T 1634.2-2004) inspection standards.
The horizontal combustion performance reaches HB level and meets the national (GB/T 2408-2008) inspection standard.
The test report of the national testing department with CMA or CNAS qualification meeting the above conditions shall be provided.
5. CNC equipment is molded with depth deviation ≤2mm, height deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;
Does FRP flame retardant anticorrosion test bench to meet national environmental protection equipment testing institutions chemical performance test: sulfuric acid (98%), hydrochloric acid, nitric acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride, acetic acid (99%), hydrogen peroxide (3%), sodium sulphide saturated liquid, formaldehyde (37%), phenol, phosphoric acid (85%), hydrofluoric acid (48%), and other 12 chemical testing, test results is no obvious change.
FRP lab bench SPECIFICATIONS:
| Product Name | Lab Workbench |
| Structure | Floor Mounted Full FRP Workbench Traditional design with roomy storage space |
| Custom-made | Dimension |
| Color |
| Worktop | 1)FRP or 16 mm/19mm/25mm thickness EPOXY RESIN, Black Color 2)304 STAINLESS STEEL cover with 25mm thickness MDF or Particle board core 3)19mm thickness WILSONART CHEMSURF/ Wilsonart Physurf/ Protector 4)19mm thickness Formica Chemtop 5)WORK TOP: 20mm thickness of Laboratory Ceramics whose surface highly resistant to chemicals and well-suited for laboratories using very aggressive products. This is an extremely hard material resistant to scratches and resistant to high temperatures. The color: Black |
| Cabinet | Worktops shall be supported by heavy above 500 KG Frame work shall be available in two heights, 750mm for sitting height and 900mm for standing height. Vertical member framework shall be with CNC punched slots for shelves/hanging cabinets. The total framework except for front and back shall be in one piece. |
| Handles | Integrated with door and drawer/Plastic/304 Stainless Steel |
| Reagent Shelf | FRP |
| Accessories |
| Faucet | Brass body with ceramic valve core coated with epoxy resin powder. |
| Sink | PP sink;ceramic sink; epoxy resin sink. |
| Socket | Electric sockets, electric circuit breakers and the telephone and computer outlets are located on this electrical trunking made of PVC and anchored to the shelf vertical supports |
| Drip cups | Drip cups can be made in different shapes and material depending on their location and task. |
PHOTO:
Product Tags:
|
|
Flame Retardant Chemistry Lab Furniture FRP Test Table Floor Mounted Structure Images
|
